Problem with the Canon BJC S400 / CanoScan N650U InkJet Printer

I need to download driver for canon BJC S400 printer for windows 7, how can I do it?


Solution:
I do not think that your printer will work with Windows 7, many printers and most scanners do not work on later OS. Fortunately a new printer is not too expensive, consider one with network capability, so more users can access all of the functions.
Here is the drivers site for Canon and I do not see 7 listed, so likely not able to run under 7....http://www.canon.ca/inetCA/serviceDetail?m=load&id=3&sid=18&mid=2000060&type=D&opt=1

Problem with the HTC 7 Trophy Cell Phone

I am unable to receive calls.


Solution:
Go to settings , check whether the airplane mode is on . Also check your network services.

Problem with the 1999 Oldsmobile Intrigue

I recharge my a/c in my olds mobile intrigue and the ac is still hot what do i need to check for next to resolve this problems.


Solution:
Have it checked for leaks or you can buy a can of sealer that comes with refrigerant in it.

Problem with the Kenmore Side by Side Refrigerator

Refrigerator and freezer stops working and then starts up again.


Solution:
Many times a freezer and/or refrigeratordo not work right because of a dirty condenser coil...there are also many otherthings that can go wrong. If you are hearing a clicking or buzzing thencheck out the last two tips.

If your refrigerator is running but warm, then...

Check out these tips that I wrote about that... it is a great place to starttrouble shooting your unit...and something that you can do rather then callinga repair person to do a simple thing for you...

Problem with the Whirlpool Whirlpool Gold AD70USS 70 Pint Per Day Ultra Low Temp Basement Dehumidifier with AccuDry Sensing Sys... Dehumidifier

When I plug it in and turn it on it trips the breaker. I have tried other outlets but it does the same thing.


Solution:
Hi, The compressor is locked up and is bad... that is what trips the breaker...

There are many reasons why a dehumidifier willnot work or collect water.
Here is a tip that I wrote to help people to figure out what is going wrongwith their dehumidifier

Problem with the Intertherm P3RA-048K Air Conditioner

We have a hvac Nordyne model P3RA-048K
Everything is working and there is cool air coming out of vents but the blower is tuning to slow so very little air forced out.


Solution:
Either the filter is clogged and needs to be repaced.Or check the coil inside the unit and see if it is getting iced up.You can try shutting the unit down for an hour or raising the temp.If this helps the motor speed then you know the coil was iced up.
It is also possible the motor may be going bad,doubtfull though since they will run for a while then shut off.
Check your filter
Check for ice
Possibly clean the inside coil.

Problem with the 2005 Suzuki Boulevard C90

How do I check the alternator/rectifier myself. Could I use the voltage meter.


Solution:
You're going to want to find the Haynes manual for your bike online (may take some searching...if you can't find one, I'll help you look)
You'll want a multi-meter with settings for Volts, Ohms, and diode/continuity testing.
Most standard multi-meters have these functions, and are easily and cheaply obtained from places like home hardware, the source, radio shack, etc.
Test the components using the known values and tolerances as outlined in the manual.
If you find this manual, MAKE BACKUP COPIES...it will be your best friend for as long as you own the bike!

Problem with the Toshiba Satellite A25-S279 (PSA20U-0CH43V) PC Notebook

While trying to install PATA 250GB HD (XP Pro) only 130GB recognized. Upgraded BIOS to v1.4 (latest) and assured by Toshiba that this would enable computer to handle 250GB. No such luck. Accessed BIOS (esc,power on, F1) but limited functionality. How do I access more functional BIOS Maintanance to check settings to see if change needed for 250GB HD and/or how do I get current configuration to accept 250GB?


Solution:
According to the detailed specs on that model, it came with a 60GB ATA-5 EIDI hard drive. therefore, you can use any ATA compatible (ATA-5, ATA-6 or ATA-100) EIDE/IDE drive that has jumpers enabling you to configure the drive as "Master". Western Digital Blue Scorpio and Seagate Momentus lines both have models that will fit the bill. You can find those drives at your neighborhood BestBuy or Staples pretty easily. I don't know if the A25 BIOS supports 48-bit logical block addressing (LBA), in spite of what toshiba says, If it only supports 24-bit LBA the maximum drive size is 137GB. If it supports 48-bit LBA then you can go as high as you can find drives available; usually 500GB. I suspect that it supports 48-bit LBA because various online vendors list up to 250GB drives for that model. The most important thing about the drive, though, is that it MUST be jumperable as 'master'. A cable select only drive won't work. Both the Western Digital and Seagate EIDE models have jumpers.

Problem with the Frigidaire GLEQ2152ES Electric Dryer

BOUGHT USED DRYER OPERATED ABOUT A MONTH WITH NO PROBLEM THEN ONE DAY PUSHED START BUTTON AND RIGHTS ON RIGHT SIDE OF DRYER BLINKED AND NO START..HAVE CHECKED ELECTRIC TO HOME IS OK..PULLED VENT OFF AND NO OBSTRUCTIONS..CHECKED THERMOSTAT AND LIMITOR WITH OHM METER SEEMS TO BE OK.


Solution:
http://www.searspartsdirect.com/partsdirect/part-number/Frigidaire-Parts/Dryer-Parts/134813601/0026/417/Model-GLEQ2152ES1/1428/0151200?keySuffixId=NA&pathTaken=partSearch&pathRender=modelComponent&documentCompId=RR708049&diagramPageId=00002&productTypeId=0151200&searchModelNumber=GLEQ2152ES1&subCompDesc=Front%20panel/lint%20filter&brandDesc=FRIGIDAIRE&modelDesc=DRYER&blt=11

Sounds like your door switch is not working. If the contacts in the switch don't close then it would not allow the dryer to start.

Problem with the Microsoft Xbox 360 Console

The current profile is not allowed to play xbox live matches.


Solution:
You may have to pay for xbox live again.

Problem with the Swiss Army Wenger 70805 Alpine Wrist Watch

When changing the battery, a gold colored circular tape came off and was lost. Now when I try to replace the battery as I put it in on an angle the second hand moves, but with battery fully in place it stops. Was this anti-conductive tape? What do I do and where would it go, above or below the battery?


Solution:
Yes, you had to have it because the positive and negative sides of the battery connects, that's why it stops. it is under the battery but the connector of the negative side must not cvered by it. i hope i had been helped you.